设备功能工艺流程

枢芯套组入大壳、后盖小壳组入大壳、漏枢芯套/后盖小壳检测、大壳啤爪、漏啤爪检测、轴长/虚位检测、极性标识、大壳侧注油、不良品排出、良品收集

部品上料

枢芯套、大壳、后盖小壳等输送带来料，夹手自动上料

适用产品

F130、F140、F260、F280、R360、R370、R385、R445等马达（非标可定制）

设备机色

草绿色(可按客供色版定制)

设备尺寸

约2000(L)*1200(W)*1800(H)mm

设备节拍

约3.5S/EA（相同生产时间，一台机的产量约相当于十人手工产量）

额定电源

AC 380V 50HZ

额定气源

0.5~0.65Mpa

其它配置

采用知名品牌电气零配件（如SMC、Airtac、Hinwin、NSK、Panasonic、ROKO、WEINVIEW、MEAN WELL等）、机加工件表面电镀或氧化处理、三色运行状态指示、可设置气压监控及快速排气系统、安全罩开门停机保护、漏电保护、程序及触摸屏界面显示可根据客户要求定制。

Equipment function process

The core sleeve is assembled into the large shell, the back cover, the small shell group into the large shell, the leakage core sleeve/back cover small shell detection, the large shell claw, the missing beer claw detection, the axial length/virtual position detection, the polarity identification, the large Shell side oil injection, defective product discharge, good product collection

Parts loading

The core sleeve, the large shell, the small shell of the back cover, etc. are conveyed to bring the material, and the handle is automatically loaded.

Applicable Products

F130, F140, F260, F280, R360, R370, R385, R445 and other motors (non-standard customizable)

Equipment color

Grass green (can be customized according to the customer color version)

Equipment size

About 2000 (L) * 1200 (W) * 1800 (H) mm

Equipment beat

About 3.5S/EA (the same production time, the output of one machine is equivalent to about 10 manual production)

Rated power supply

AC 380V 50HZ

Rated air source

0.5~0.65Mpa

Other configuration

Use well-known brand electrical parts (such as SMC, Airtac, Hinwin, NSK, Panasonic, ROKO, WEINVIEW, MEAN WELL, etc.), machined parts surface plating or oxidation treatment, three-color operation status indication, air pressure monitoring and rapid exhaust System, safety cover opening and closing protection, leakage protection, program and touch screen interface display can be customized according to customer requirements.